Category Archives: Casing Pipe Manufacturers

Casing Pipe, Perforated Casing Pipe, and Slot Casing Pipe Manufacturers

WRG (Weatherock Groups) provides one whole range of very high-quality casing series, drill pipe series, downhole motors series, sucker rods series. Moreover, it provides many more relates accessories for use in all kinds of oil and gas drilling. It also gives accessories for well completion activities. For the OCTG (Oil Country Tubular Goods) productions, besides its Chinese facilities, they are having a strategy to set up their facilities in Southeast Asia, which surely meets the local market there and the other international markets’ needs. (Casing Pipe Manufacturers, Perforated Casing Pipe Manufacturers, Slot Casing Pipe Manufactures)

Regular API Casing:

  • Size: 1.050 inch – 20 inch.
  • Grade: K55 – P110.
  • Connection Thread: BTC, LTC, etc.

High Collapse Casing:

While selling, WRG (Weatherock Groups) ensures the best results. They designed it by selecting and controlling the most important factors. Moreover, they delivered it with the guaranteed minimum high collapse raring. When it comes to piping, the best quality which can give us the durability guarantee is all we should look for.

In the above table, we can see the different Steel Grade with the YS Range (KSI-MPa) and UTS min (KSI-MPa). Lastly, Elongation comes which we can find according to the API formula.

Perforated Casing Pipe:

Perforated Pipes are made up of the Perforated sheet. And they are used as filter tubes but sometimes also used for various instalment. This Pipe comes in various forms but usually in a round and square section. Perforated Pipe is getting very famous these days in industrial, architecture, automobile marking and other fields. However, the design of the pipe may vary according to the customer’s requirements. WRG (Weartherock Groups) supply these perforated casing pipes with the guarantee of durability and they convince us with the experience of more than 30 years.

Perforated Gun Tube:

If we talk about the International Market, WRG (Weatherock Groups) has already delivered nearly 15000 tons of perforated gun tubes to Canada, Cuba, America, Colombia, etc. Thanks to our superior quality and reliability. All this could happen just because of more than 30 years of experience. It also comes with a few standards and some specifications, few of them are mentioned below.

Specifications and Standards:

  • Standards: ASTM A519, API 5CT, EN 10210, EN 10216, DIN 1629.
  • Size Range: 50.8mm – 177.8m (Cold-drawn and hot rolled Tubes).
  • Steel Grade: TP 110P – TP 165P, TP-Q750 – TP-Q1000.

Slot Casing Pipes:

OCTG Slotted Liner is usually used to carbonate the reservoirs and sand the rock. Moreover, it is used for the horizontal wells. The yearly processing capacity of WRG (Weatherock Groups) can reach 150000 meters of all types of liner pipes: including multiple staggered slot patters, line slot patterns, staggered slot patters, etc. Lastly, the stainless steel and carbon steel and others can be made available.

Casing Slot Pipes in wells:

The tube-well casing houses the inlet, piston valves or cylinder and rising main of a down-the-hole type pump. If we talk about the casing that is needed for the support of the external surface of the borehole against collapse, either permanently or temporarily. Moreover, it is made of PVC pipe which is both inert and cheap.

Sanitary seal prevents the seepage down the tube-well bore. The aquifer is excluded above the ground from seepage by the length of the plain casing. And the water that is to be pumped is allowed through the slot in the lower length of the casing. And so on…


You can visit the site very easily for the in-depth details of the products. The link to the site is given below:


How Does Casing Pipe Work?

Once a well has been drilled, if it is to become manufacture well, the well must undergo completion. While drilling good cuts through the rock formation and allow drilling engineers to reach the reservoir below, the raw sides of the well cannot support themselves. Similar to the bones of your spine protecting the spinal cord, the casing is tubing that is set inside the drilled well to protect and support the good stream.

In addition to providing stabilization and keeping the sides of the well from caving in on themselves, casing pipe protects the good stream from outside contaminants, as well as any freshwater reservoirs from the oil or gas that is being produced.

Also, you are known as setting pipe, casing a well involves running steel pipe down the inside of a recently drilled well. The small space between the casing and the untreated sides of the well is filled with cement to lastingly set the casing in place.

Casing a Well

The packaging is created in the area, or joints, that are more often than not around 40 feet in length and screwed together to frame longer lengths of packaging, called packaging strings. Each finish of the packaging joint has male strings that are secured by top called a string defender until the housings are fit to be jointed. At that point, a neckline or coupling, made out of a short round and hollow steel pipe that is somewhat bigger in width than the joints and furthermore has female strings, is utilized to associate the two male joint finishes. A string compound is utilized on the two finishes to guarantee a tight seal.

The packaging is kept running from the apparatus floor, associated with each joint in turn by packaging lifts on the voyaging square and wounded into the past packaging string that has been embedded into the well. Hanging over the drill floor, packaging tongs screw each packaging joint to the packaging string.

The packaging is kept running into the well and authoritatively landed when the heaviness of the packaging string is moved to the packaging holders, which are situated at the highest point of the well and use slips or strings to suspend the packaging in the well.

An adjusted area of the pipe with an open gap on the end, a guide shoe is associated with the primary packaging string to control the packaging team in running the packaging into the well. Furthermore, the outside of the packaging has spring-like centralizers connected to them to help position in packaging string in the focal point of the well.

 In the wake of running the packaging and before establishing the well, and the utilized bore is embedded into the well by means of a drill string, and boring liquid is then coursed for a specific measure of time to expel any outstanding cuttings from the well. Likewise, divider scratchers are dispatched into the well to evacuate any channel cake that may have framed on the sides of the well.

Concrete slurry is then siphoned into the well and permitted to solidify to for all time fix the packaging set up. After the concrete has solidified, the base of the well is bored out, and the fruition procedure proceeds.

Packaging Programs

Once in awhile the well is bored in stages called a packaging program. Here, a well is bored to a specific profundity, cased and established, and afterward the well is penetrated to a more profound profundity, cased and solidified once more, etc. Each time the well is cased, a littler measurement packaging is utilized.

The broadest kind of packaging is called conductor pipe, and it, for the most part, is around 30 to 42 creeps in breadth for seaward wells and 16 crawls in measurement for coastal wells. The following size in packaging string is the surface packaging, which can run a few thousand feet long.

In certain wells, insurance or middle of the road packaging is hurried to separate testing regions or issue zones, including regions of high weight or lost dissemination.

The last sort of packaging string that is kept running into the well, and in this way the littlest in breadth, is the generation or oil string. The oil string is run legitimately into the delivering store.

Packaging Alternatives

With an end goal to set aside cash, in some cases, a liner string is kept running into the well rather than a packaging string. While a liner string is fundamentally the same as packaging string in that it is comprised of discrete joints of tubing, the liner string isn’t run the total length of the well. A liner string is hung in the well by a liner holder and afterward solidified into spot.

Are you looking for Casing Pipe Manufacturers & Fabricante De Tuberia De Revestimiento USA and Spain Contact

Thank you